1995年4月　　日本学術振興会特別研究員(PD)
1996年5月　　東北大学流体科学研究所極限流研究部門極低温流研究分野 助手
1999年4月　　弘前大学理工学部 助教授
2005年4月　　東北大学流体科学研究所　附属流体融合研究センター 実事象融合計算研究分野 助教授
2007年4月　　東北大学流体科学研究所　附属流体融合研究センター 実事象融合計算研究分野 准教授
2012年5月　　東北大学流体科学研究所　附属流体融合研究センター 実事象融合計算研究分野 教授

2000年4月〜2001年3月　　University of Kentucky機械工学科
Industrial Applications and Engineering Science Laboratory 客員研究員
[1994年4月〜1995年3月　日本学術振興会特別研究員(DC2)]

1996年　日本機械学会賞（研究奨励賞）
1996年　日本混相流学会ベストプレゼンテーション賞
1998年　日本混相流学会萌芽賞
2003年　インテリジェントコスモス奨励賞
2003年　日本混相流学会賞（論文賞）
2008年　日本混相流学会賞（技術賞）
2010年　Cryogenics Best Paper Award 2009
2010年　日本機械学会流体工学部門フロンティア表彰

【学部】　流体力学II
【大学院】　融合流体情報学， システム情報科学ゼミナール

• 極低温マイクロスラッシュ利用型超高熱流束冷却システムの開発
• 「液体へリウムキャビテーション流を用いた超流動混相高速冷却システムの開発」
• 「スラッシュ窒素混相流を用いた長距離超伝導ケーブルの極低温冷却に関する研究」
• 「インジェクターノズル微粒化機構の高精度数値予測」
• 「極低温流体混相流を用いた先進宇宙応用機器開発に関する研究」
  
• 「アルミインゴットクラック軽減型直接ミスト流冷却システムに関する研究」
• 「微小重力下における単一液滴消炎時に生ずる振動現象に関する研究」
• 「微小重力下における特殊流体マイクロ気泡ポンプの開発」
• 「電磁流体混相流を用いたマイクロ直接発電システムの開発」

公表論文等(Journal)

1. Jun ISHIMOTO, Toshinori Sato, Alain Combescure,
   Computational approach for hydrogen leakage with crack propagation of pressure vessel wall using coupled particle and Euler method
   International Journal of Hydrogen Energy (2017) [on line]
2. Jun ISHIMOTO, U Oh and Daisuke Tan,
   Integrated Computational Study of Ultra-High Heat Flux Cooling Using Cryogenic Micro-Solid Nitrogen Spray
   Cryogenics, Volume 52, Issue 10, October 2012, Pages 505-517.
3. Jun Ishimoto, Daisuke Tan, U. Oh, Tomihiro Kubota, and Seiji Samukawa, 
   Integrated Experimental and Numerical Study, of Thermomechanical Resist Removal-Cleaning Performance Using Cryogenic Micro-Solid Nitrogen Spray, 
   ECS Transactions, Vol. 41, No.5, pp. 83-90 (2011).
4. Jun Ishimoto, Daisuke Tan, Hiroto Otake and Seiji Samukawa, 
   Thermomechanical Resist Removal-Cleaning System Using Cryogenic Micro-Slush Jet,
   Solid State Phenomena, Vol. 187 (2012) pp. 145-148.
5. Jun ISHIMOTO , Shinji AKIBA, Kazuhiro TANJI and Kazuo MATSUURA,
   Integrated Super Computational Prediction of Liquid Droplet Impingement Erosion, 
   Progress in Nuclear Science and Technology, Vol. 2 (2011) pp.498-502.
   
6. Jun ISHIMOTO, Fuminori Sato and Gaku Sato,
   Computational Prediction of the Effect of Micro-cavitation on an Atomization Mechanism in a Gasoline Injector Nozzle
   Trans. ASME, Journal of Engineering for Gas Turbines and Power, Vol. 132, Issue 8 (2010) 082801 doi:10.1115/1.4000264.
   
7. Jun ISHIMOTO,
   Numerical Study of Cryogenic Micro-Slush Particle Production Using a Two-Fluid Nozzle
   Cryogenics, Vol. 49 (2009) pp. 39-50.
8. Jun ISHIMOTO,
   Development of Production System of Cryogenic Micro-slush Particles Using a Two-fluid Nozzle,
   International Communications in Heat and Mass Transfer, Vol. 35, Issue 10 (2008) pp.1235-1240.
9. Jun Ishimoto, Katsuhide Ohira, Kazuki Okabayashi and Keiko Chitose,
   Integrated Numerical Prediction of Atomization Process of Liquid Hydrogen Jet,
   Cryogenics, Vol. 48 (2008) pp. 238-247.
10. Katsuhide Ohira, Masakazu Nozawa, Jun Ishimoto, Noriyasu Koizummi and Takanobu Kamiya,
    Pressure Drop Reduction of Slush Nitrogen in Turbulent Pipe Flows,
    Advances in Cryogenic Engineering, Vol. 53 (2008) pp. 67-74.　
11. Katsuhide Ohira, Jun Ishimoto, Masakazu Nozawa, Toshio Kura and Norifumi Takahashi,
    Heat Transfer Characteristics of Slush Nitrogen in Turbulent Pipe Flows,
    Advances in Cryogenic Engineering, Vol. 53 (2008) pp. 1141-1148.
12. Jun Ishimoto, Takashi Kudo and Kozo Saito,
    The Effect of Magnetic Field on a Microgravity Single Droplet Combustion,
    Heat and Mass Transfer, Vol. 44, No. 6 (2008) pp.635-640.
13. 石本淳，
    二流体ノズルを用いた極低温マイクロスラッシュ粒子の生成，
    低温工学，Vol. 42, No. 5, (2007), pp.116-123.
14. Jun Ishimoto and Kenjiro Kamijo,
    Numerical Analysis of Cavitating Flow of Liquid Helium in a Converging-Diverging Nozzle,
    Trans. ASME, Journal of Fluids Engineering, Vol. 125, Issue 5 (2003), pp.749-757.
15. Jun ISHIMOTO, Hidehiro HOSHINA, Tadashi TSUCHIYAMA, Hideyuki WATANABE, Asako HAGA and Fuminori SATO,
    Integrated Simulation of the Atomization Process of Liquid Jet Through a Cylindrical Nozzle
    Interdisciplinary Information Sciences, Vol. 13, No. 1 (2007), pp.7-16.
16. Jun ISHIMOTO ,
    Stability of Boiling Two-Phase Flow of Magnetic Fluid,
    Trans. ASME, Journal of Applied Mechanics, Vol. 74, Issue 6 (2007), pp. 1187-1196.
17. Jun Ishimoto, Takashi Kudo and Kozo Saito,
    The Effect of Magnetic Field on a Microgravity Single Droplet Combustion,
    Heat and Mass Transfer, Vol. 43 (2007) [On line first].
    
18. Jun Ishimoto
    Numerical prediction of a two-phase fluid driving system using cavitating flow of magnetic fluid,
    International Journal of Heat and Mass Transfer, Vol.49, Issues 21-22 (2006), pp. 3866-3878.
19. Jun ISHIMOTO ,
    Numerical Prediction of Two-Phase MHD Power Generation System Using Cavitating Flow of Electrically Conducting Magnetic Fluid,
    Progress in Multiphase Flow Research, Vol. I, (2006) pp. 249-264.
    
20. Jun Ishimoto, Masahiro Onishi, and Kenjiro Kamijo,
    Numerical and Experimental Study on the Cavitating Flow Characteristics of Pressurized Liquid Nitrogen in a Horizontal Rectangular Nozzle,
    Trans. ASME, Journal of Pressure Vessel Technology, Vol. 127, Issue 4 (2005), pp.515-524.
21. Jun Ishimoto and Shinichi Kamiyama
    Numerical Analysis of Cavitating Flow of Magnetic Fluid in a Vertical Venturi Channel,
    JSME International Journal, Vol. 48, No. 3 (2005) pp.478-487.
22. Jun Ishimoto,
    CFD Analysis on two phase pipe flow of slush nitrogen,
    Advances in Cryogenic Engineering, Vol. 51 (2006) pp.1017-1024.
23. Jun Ishimoto and Ryusuke Ono
    Numerical Study of the Two-Phase Flow Characteristics of Slush Nitrogen,
    Cryogenics, Vol.45, Issue 4 (2005), pp.304-316.
24. Jun Ishimoto and Shinichi Kamiyama
    Numerical Study of Cavitating Flow of Magnetic Fluid in a Vertical Converging-Diverging Nozzle
    Journal of Magnetism and Magnetic Materials, Vol. 289 (2005), pp.260-263.
25. 石本淳・大野隆介，
    スラッシュ窒素の二相流動特性に関する数値解析，
    低温工学，Vol. 39, No. 10, (2004) pp.463‐474.
26. Jun Ishimoto,
    Numerical Prediction of Cavitating MHD Flow of Electrically Conducting Magnetic Fluid in a Converging-Diverging Nozzle,
    Trans. ASME, Journal of Applied Mechanics, Vol. 71, Issue 6 (2004), pp.825-838.
27. 石本淳・上條謙二郎，
    垂直先細−末広ノズル内における液体ヘリウム気液二相流に関する数値解析
    日本機械学会論文集 （B編），Vol.70, No.696 (2004) pp.2134-2141．
    (Jun Ishimoto and Kenjiro Kamijo,
    Numerical Study of Two-Phase Flow of Liquid Helium in a Vertical Converging-Diverging Nozzle,
    Heat Transfer- Asian Research, Vol. 34, No. 6 (2005), pp.432-448.)
28. 石本淳，工藤崇，伊藤昭彦，Kozo SAITO, Vedha NAYAGAM,
    微小重力下における単一液滴の消炎現象に関する数値解析
    微粒化，Vol. 13, No.41 (2004) pp.148-155 .
29. Jun Ishimoto and Kenjiro Kamijo,
    Numerical Study of Cavitating Flow Characteristics of Liquid Helium in a Pipe,
    International Journal of Heat and Mass Transfer, Vol. 47, Issue1 (2004) pp.149-163.
30. Jun Ishimoto, Ryusuke Ohno, Hideharu Yanagi, Akito Machida, Masamitsu Ikeuchi,
    Kazuhiro Hattori, and Akihiko Ito,
    Basic Study on Two-Phase Flow Characteristics of Slush Nitrogen in a Pipe,
    Advances in Cryogenic Engineering, Vol. 49B (2004), pp.1099-1106.
31. Jun Ishimoto and Kenjiro Kamijo,
    Numerical Simulation on Cavitating Flow of Liquid Helium in Vertical Converging-Diverging Nozzle,
    Advances in Cryogenic Engineering, Vol. 49B (2004), pp.1060-1067.
32. 石本淳・上條謙二郎，
    水平狭まり−広がり流路内における液体ヘリウムキャビテーション流れの数値解析
    日本航空宇宙学会論文集，Vol. 51, No.592 (2003), pp.228-235.
33. Jun Ishimoto and Kenjiro Kamijo,
    Numerical Simulation of Cavitating Flow of Liquid Helium in Venturi Channel,
    Cryogenics, Vol. 43, No.1, (2003) pp.9-17.
34. 石本淳・上條謙二郎，
    液体ヘリウムのベンチュリ流路内キャビテーション流れに関する数値シミュレーショ ン
    低温工学，Vol. 37, No.10 (2002), pp.565-572.
35. Jun Ishimoto, Mamoru Oike and Kenjiro Kamijo,
    Numerical Analysis of Two-Phase Pipe Flow of Liquid Helium Using Multi-Fluid Model,
    Trans. ASME, Journal of Fluids Engineering, Vol. 123, Issue 4 (2001) pp. 811-818.
36. Jun Ishimoto, Mamoru Oike and Kenjiro Kamijo,
    Numerical Simulation of Cavitating Flow of Liquid Helium in a Pipe Using Multi-Fluid Model,
    Advances in Cryogenic Engineering, Vol. 47, May (2002) pp.1413-1420.
37. Jun Ishimoto,
    Cavitating flow of Magnetic Fluid in Converging-Diverging Nozzle under Nonuniform Magnetic Field,
    Magnetohydrodynamics, Vol. 38, No.3 (2002). pp.307-318.
38. Jun Ishimoto, Mamoru Oike and Kenjiro Kamijo,
    Two-Dimensional Numerical Analysis of Boiling Two-Phase Flow of Liquid Helium,
    JSME International Journal (Series B), Vol. 43, No.1 (2000), pp.62-70 .
39. Jun Ishimoto, Mamoru Oike and Kenjiro Kamijo,
    Two-Dimensional Numerical Simulation of Boiling Two-Phase Flow of Liquid Nitrogen,
    Trans. Jpn. Soc. Aero. Space Sci., Vol. 43, No.141 (2000), pp.114-121.
40. 石本淳・尾池守・上條謙二郎，
    液体ヘリウムの沸騰二相流に関する二次元数値解析，
    日本機械学会論文集 （B編），第65巻，630号 (1999), pp.482-489.
41. 石本淳・尾池守・上條謙二郎，
    液体窒素の気液二相流動特性に関する数値解析，
    日本機械学会論文集 （B編），第64巻，622号 (1998), p.1741-1747.
42. Jun Ishimoto and Shinichi Kamiyama,
    Wave Propagation in Two-Phase Flow of Magnetic Fluid under a Nonuniform Magnetic Field,
    Nuclear Engineering and Design, Vol. 175, p.87-96, (1997).
43. Tomoyuki Hashimoto, Hitoshi Yamada, Shiro Funatsu, Jun Ishimoto, Kenjiro Kamijo and Yoshinobu Tsujimoto,
    Rotating Cavitation in Three and Four-Bladed Inducers,
    AIAA Paper, 97-3026, Presented at the 33th AIAA/ASME/SAE /ASEE Joint Propulsion Conference & Exhibit, July 6-9, (1997), Seattle, WA.
44. Jun Ishimoto, Masaaki Okubo and Shinichi Kamiyama,
    Basic Study on an Energy Conversion System Using Gas-Liquid Two-Phase Flows of Magnetic Fluid (Analysis on the Mechanism of Pressure Rise),
    JSME International Journal (Series B), Vol. 39, No.1, pp.72-79,(1996).
45. 石本淳・神山新一，
    非一様磁場下における磁性流体中の気泡の挙動に関する数値解析，
    日本機械学会論文集（B編），第62巻，603号，3777-3783 頁，(1996).
46. 石本淳・大久保雅章・神山新一，
    磁性流体沸騰二相流の安定性に関する研究，
    日本機械学会論文集（B編），第62巻，595号，903-912 頁，(1996)．
47. 石本淳・大久保雅章・神山新一，
    感温磁性流体沸騰二相流エネルギー変換システムに関する基礎研究 （熱非平衡モデルによる理論解析と超音波エコーを用いた流れの可視化計測） ，
    日本機械学会論文集（B編），第61巻，581号，157-165 頁，(1995)．
48. Shinichi Kamiyama and Jun Ishimoto,
    Boiling Two-Phase Flows of Magnetic Fluid in a Nonuniform Magnetic Field,
    Journal of Magnetism and Magnetic Materials, Vol. 149, pp.125-131, (1995)．
49. Jun Ishimoto, Masaaki Okubo, Shinichi Kamiyama and Masaru Higashitani ,
    Bubble Behavior in a Magnetic Fluid under a Nonuniform Magnetic Field,
    JSME International Journal (Series B), Vol. 38, No.3, pp.382-387, (1995).
50. 石本淳・大久保雅章・神山新一，
    感温導電性磁性流体二相流MHD発電システムの研究 （管内流動特性および発電特性の理論的考察），
    日本機械学会論文集（B編），第60巻，571号，891-898 頁，(1994).
51. Masaaki Okubo, Jun Ishimoto, Hideya Nishiyama and Shinichi Kamiyama,
    Analytical Study on Two-Phase MHD Flow of Electrically Conducting Magnetic Fluid,
    Magnetohydrodynamics, Vol. 29, No.3, pp.291-297, (1994).
    Magnitnaja Gidrodinamika, Vol. 29, No.3, pp.87-92, (1993).
52. 石本淳・大久保雅章・西山秀哉・神山新一，
    磁性流体気液二相流を用いたエネルギー変換システムに関する基礎研究 （圧力上昇効果に関する検討），
    日本機械学会論文集（B編），第59巻，566号，3071-3077 頁，(1993).

1. Jun ISHIMOTO, Hidehiro HOSHINA, Tadashi TSUCHIYAMA, Hideyuki WATANABE and Asako HAGA,
   Integrated CFD Aproach of the Liquid Atomization Mechanism in an Injector Nozzle,
   Proceedings of the 10th International Conference on Liquid Atomization and Spray Systems (ICLASS-2006),
   August 27-September 1 (2006), [in CD-ROM].
2. Integrated CFD on Atomization Process of Lateral Flow in Injector Nozzle,
   Second Korea-Japan CFD Workshop, October 13 (2006), KAIST, Daejeon, Korea (Invited Lecture).
   
3. Jun Ishimoto, Masahiro Onishi, Takashi Tokumasu, and Kenjiro Kamijo,
   Cavitating Flow of Liquid Nitrogen in Horizontal Rectangular Nozzle,
   Proceedings of The IMECE'03, 2003 ASME International Mechanical Engineering Congress & Exposition, Washington, D.C., November 16-21, (2003) [in CD-ROM].
4. Jun Ishimoto and Kenjiro Kamijo,
   Numerical Prediction of Cavitating Flow of Liquid Helium in a Converging-Diverging Nozzle,
   Proceedings of The Fifth International Symposium on Cavitation (CAV2003), Osaka, Japan (2003.11), [in CD-ROM].
5. Jun Ishimoto, Akihiko Ito, Kozo Saito and Vedha Nayagam,
   Numerical Analysis of Microgravity Methanol Single Droplet Combustion in Homogeneous Flow,
   Proc. 4th International Symposium on Scale Modeling (ISSM-IV), Cleveland USA (2003.9), pp.241-249.
6. Jun Ishimoto, Ryusuke Ohno, Akihiko Ito and Kozo Saito,
   Basic Study on Direct Mist Cooling of Heated Aluminum Plate for Crack Reduction,
   Proceedings of the 7th Annual Conference of Liquid Atomization and Spray Systems-Asia, Ilass-Asia, (2002) pp.214-221.
7. Jun Ishimoto, Mamoru Oike and Kenjiro Kamijo,
   Two-Dimensional Numerical Simulation of Cavitating Flow of Superfluid Helium II,
   Proceedings of the First International Symposium on Advanced Fluid Information, AFI-2001, pp.245-250 (2001).
8. Jun Ishimoto, Mamoru Oike and Kenjiro Kamijo,
   Numerical Analysis on Boiling Two-Phase Flow of Liquid Helium,
   Proceedings of The 1999 National Heat Transfer Conference, ASME (1999), Albuquerque, New Mexico.
9. Jun Ishimoto, Mamoru Oike and Kenjiro Kamijo,
   Numerical Simulation on Boiling Two-Phase Flow of Liquid Helium,
   Proceedings of The 3rd ASME/JSME Joint Fluids Engineering Conference, FED-Vol. 248 (1999).
10. Jun Ishimoto, Kenjiro Kamijo and Mamoru Oike,
    Numerical Simulation on Boiling Two-Phase Flow of Liquid Nitrogen,
    Proceedings of The International Symposium on Computational Technologies for Fluid/Thermal/ Structural/Chemical Systems With Industrial Applications, PVP-Vol. 377-2, pp.219-225, (1998).
11. Jun Ishimoto, Shinichi Kamiyama and Kenjiro Kamijo,
    Nonlinear Wave Propagation in Two-Phase Flow of Magnetic Fluid under a Nonuniform Magnetic Field,
    Proceedings of the International Symposium on Hydrodynamics of Magnetic Fluids and its Applications, pp.41-44, (1997).
12. Shinichi Kamiyama and Jun Ishimoto,
    Behavior and Dynamics of Magnetic Fluid as a Multiphase Fluid,
    Proceedings of The Japan - U.S. Seminar on Two-Phase Flow Dynamics, pp.245-250, (1996).
13. Shinichi Kamiyama and Jun Ishimoto,
    Wave Propagation in Boiling Two-Phase Flow of Magnetic Fluid under a Nonuniform Magnetic Field,
    Proceedings of The Japan - U.S. Seminar on Two-Phase Flow Dynamics, pp.251-258, (1996).
14. Jun Ishimoto, Masaaki Okubo and Shinichi Kamiyama,
    Visualization Analysis on the Boiling Two-Phase Flow Characteristics of Magnetic Fluid in a Nonuniform Magnetic Field,
    Proceedings of The Flow Visualization and Image Processing of Multiphase Systems, FED-Vol. 209 (ASME), pp.179-186, (1995).
15. Jun Ishimoto, Masaaki Okubo and Shinichi Kamiyama,
    Effect of Magnetic Field on the Stability of Boiling Two-Phase Flows of Magnetic Fluid, Proceedings of the 2nd International Conference on Multiphase Flow, Vol. 4, pp.FC17-FC24, (1995).
16. Krakov, Mikhail., Shinichi Kamiyama and Jun Ishimoto,
    Influence of Magnetic Field on the Bubble Size in the Boiling Magnetic Fluids,
    Proceedings of the 14th International Riga Conference on Magnetohydrodynamics, MAHYD 95, Jurmala, Latvia, August 24-26 (1995).
17. Jun Ishimoto, Masaaki Okubo and Shinichi Kamiyama,
    Basic Study on an Energy Conversion Syetem Using Gas-Liquid Two-Phase Flow of Magnetic Fluid,
    Proc. 16th Symposium on Efficient Use of Energy and Direct Electrical Power Generation (Hokkaido Univ.) 3.6 (1994).
18. Jun Ishimoto, Masaaki Okubo, Hideya Nishiyama and Shinichi Kamiyama,
    A Basic Study on an Energy Conversion System Using a Gas-Liquid Two-Phase Magnetic Fluid Flow in a Nonuniform Magnetic Field,
    Proceedings of the International ISEM Symposium on Simulation and Design of Applied Electromagnetic Systems, pp.461-464,(1994).
19. Shinichi Kamiyama , Masaaki Okubo, Jun Ishimoto and Masaru Higashitani,
    Bubble Behaviour in a Magnetic Fluid in a Nonuniform Magnetic Field,
    Proceedings of The Second International Symposium on Cavitation, pp.305-310, (1994).
20. Masaaki Okubo, Jun Ishimoto and Shinichi Kamiyama,
    Basic Study on an Energy Conversion System Using Gas-Liquid Two-Phase Flows of Magnetic Fluid,
    Proc. 1994 ASME Fluids Engineering Division Summer Meeting, (Lake Tahoe, USA) FED-Vol. 194 (1994-6) pp.105-110.
21. Masaaki Okubo, Jun Ishimoto, Hideya Nishiyama and Shinichi Kamiyama,
    Analytical Study on Two-phase MHD Flow of Electrically Conducting Magnetic Fluid,
    Proc. on the Int. Conf. on Energy Transfer in Magnetohydrodymamic Flows, (Cadarache, France) (1991-9) pp.323-328.

パラパラ， SUPEREUROBEAT， J-POP